Siphonic rainwater drainage: the right solution for large roofs

Water Management14 November 2026Ekura Engineering

On large roofs such as warehouses, factories and shopping centres, conventional rainwater drainage needs many downpipes. Siphonic systems do the same job with fewer pipes and fewer downpipes.

Rainwater drainage on large-roofed buildings looks simple at first glance. However, a conventional (gravity) system needs pipes laid to a fall and a downpipe every few hundred square metres. That means many pipes and columns inside the building and long underground drainage runs.

Animated explainer · on-screen text in Turkish

How does a siphonic system work?

In a siphonic system, the roof outlets have a special design that stops air from entering the pipe. When rain starts, the pipes quickly fill completely with water. The height difference between the roof and the foot of the downpipe draws the water through the pipe at high velocity. Thanks to this suction effect:

  • Collector pipes can be laid without a fall.
  • Pipe diameters are smaller than in conventional systems.
  • Many outlets can connect to a single downpipe.
  • The number of downpipes and underground drainage runs falls significantly.

Why design matters

A siphonic system depends entirely on hydraulic calculation. The flow from each outlet and the pipe diameters and lengths must be balanced so that the system fills quickly and the siphon starts. The calculation is made according to the relevant European standard (EN 12056-3) with manufacturer software. A bend or diameter change not shown in the design can spoil performance, so installation must match the design exactly.

Installation details

  • Support: When pipes run full at high velocity, vibration and forces occur. Collector pipes hang from a rail system fixed to the roof structure, with provisions for expansion.
  • Material: Welded HDPE pipes are usually used, giving tight and durable joints.
  • Discharge point: The downpipe connects to a discharge chamber that breaks the water’s velocity before the stormwater line.
  • Overflow safety: Separate overflow (emergency) outlets are needed to prevent ponding on the roof during extreme rain or blockages.

Maintenance

The roof needs regular checks so that outlets are not blocked by leaves, bags and dust. Cleaning the outlets, especially in autumn and before the rainy season, is essential for the system to work as designed.

Using rainwater

Rainwater collected by a siphonic system can be stored in a tank and used for irrigation, toilet flushing or process water. This provides significant water savings in large-roofed buildings.

Conclusion

Siphonic drainage gives large roofs fewer pipes, fewer downpipes and a more flexible interior. At Ekura, we install siphonic systems from hydraulic calculation to installation. You can see a detailed siphonic system in our 3D Logistics Warehouse tour and learn more about our water management and plumbing solutions.

Let's talk about your project.

A site survey, a quote or a technical question — our team will listen to your project and work with you to define the right solution.

Message us on WhatsApp