The hidden systemsof a food factory.
From the hygienic production area to the cold store, from the steam boiler to wastewater treatment: the mechanical systems of a food factory. Scroll and explore with us.
Clean airabove the product.
A hygienic air handling unit distributes filtered fresh air slowly and evenly over the production area through textile ducts. The area is kept at positive pressure relative to the outside; dust, insects and contaminated air cannot get in.
The product at the right temperatureat all times.
A glycol chiller cools the jackets of the process tanks through a buffer tank; product temperature is under control at every step. The chiller's heat is rejected through air-cooled condensers outside.
The cold chainis never broken.
The refrigeration unit keeps the cold room at +4 °C and the blast freezer at −25 °C; ceiling evaporators circulate air along the racks. The air curtain at the door to the production area reduces warm air entering when the door opens.
Cooking, cleaning,sterilisation.
The steam boiler produces steam for cooking, CIP heating and the process tanks. Feed water is softened and deaerated; condensate is collected and returned to the boiler, saving energy and water.
Cleaned withoutdismantling the line.
The CIP system cleans tanks and pipelines without taking them apart: first water, then caustic, water again, then acid and a final rinse. Solutions are brought to the right temperature in a steam-heated plate heat exchanger and conductivity sensors confirm each step.
Oil-free airthat touches the product.
Compressed air from oil-free compressors, passed through a dryer and filters, feeds the filling and packaging machines. The air receiver balances the pressure and the compressors run in stages as needed.
Always the same waterin the recipe.
Mains water is treated in the reverse osmosis unit, stored in the process water tank and supplied to the mixing tanks. Its conductivity is measured continuously, so product quality is not affected by the water.
The compressor's heatis not wasted.
Heat from the compressors' oil coolers is collected in a hot water tank and used to preheat CIP water. This reduces steam demand and fuel consumption.
Water returnedclean to nature.
Production and cleaning wastewater first passes through a grease separator; its flow and pH are balanced in the equalisation tank. It is treated by aeration in the biological stage, separated from sludge in the settling tank and discharged within the permitted limits.
Water readyfrom production to storage.
The fire water tank and pump room are separate from the main building. The main feeds the sprinkler lines and hose cabinets in the production area and the cold store.
Smoke goes outthrough the top.
When a fire is detected, the smoke vents on the roof open; hot smoke is released at the top, protecting escape routes and visibility.
The whole factoryon one screen.
Process tanks, cold store, steam, compressed air, CIP and wastewater treatment are monitored from a single SCADA screen. Choose a scenario and see how the screen and the factory change.
Let's plan your facilitytogether.
Let's review your project together before installation; we install the mechanical and process piping, carry out testing, adjusting and commissioning, and hand them over.
