The hidden systemsof a metro station.
From tunnel ventilation to platform screen doors, from fire water to SCADA: the mechanical systems of an underground station. Scroll and explore with us.
Smoke is pushedaway from passengers.
The ventilation structures at the station ends house reversible tunnel ventilation fans (TVF). In a train fire in the tunnel, the fans push air in the direction of travel; smoke moves away from passengers, who are evacuated towards fresh air and the station.
Air pushed by the trainleaves through shafts.
A train moving through the tunnel pushes the air ahead like a piston. Piston shafts at the station ends release this air to the surface and draw fresh air in behind the train; tunnel air is renewed and pressure on the platform doors is reduced. Motorised dampers are open in normal operation and close in a tunnel fire to direct air the way the TVFs require.
Not air conditioning,constant fresh air.
Public areas are not air-conditioned. Supply fans deliver fresh air through ducts in the concourse and on the platform, and exhaust fans discharge stale air through the shaft at the other end. Because platform screen doors separate tunnel air from the platform, the platform is ventilated by its own ducts.
Only the rooms that need itare air-conditioned.
Special rooms such as the station control room, the signalling and communications room and the power and UPS rooms are air-conditioned with split units. Outdoor units stand at the surface in an area that is easy to reach for maintenance.
Gas extinguishes,not water.
In the signalling and communications room, water would damage the equipment. When smoke is detected, a warning is given, the doors close and inert gas fills the room to put out the fire; the equipment is not harmed.
Pressurised wateralong the whole line.
The fire water tank and pump set are at one end of the station. The jockey pump keeps the main under constant pressure; when a hose cabinet or sprinkler opens, the duty pump starts and the standby pump waits in reserve.
Continuous waterfrom station to tunnel.
The wet fire main runs along the track through the platform and tunnel. Hose cabinets and landing valves are placed at intervals in the station and along the tunnel walkway. Fire engines can pump water into the system through the fire brigade inlet at the surface.
Put outbefore it grows.
The ticket hall, retail areas and stores are protected by sprinklers. Only the heads above the fire open; damage stays limited to where the fire started.
Smoke is extracted,escape routes stay clear.
In a platform fire, the platform exhaust fan switches to smoke extraction mode and the supply fans stop. A downward flow of fresh air forms on the stairs, so smoke cannot enter the passengers' escape route. The escape stair is kept smoke-free by a pressurisation fan.
Water collects at the line'slowest point.
Groundwater seeping into the tunnel and washing water flow through trackside channels to the sump at the lowest point of the line. Duty and standby drainage pumps discharge it through the rising main to the sewer at the surface; the sump level is monitored on SCADA.
A glass boundarybetween platform and track.
Platform screen doors separate passengers from the track and prevent falls and pushing accidents. When the train stops they open in sync with the train doors and close and lock before departure. Because platform air is separated from tunnel air, ventilation also works more efficiently.
The whole stationon one screen.
Fans, dampers, pumps, platform doors and drainage level are monitored on SCADA. In an emergency a scenario is started and fans and dampers move to predefined positions. Choose a scenario and see how the screen and the station change.
Let's plan your rail projecttogether.
Let's review your project together before installation; we install the mechanical systems, carry out testing, adjusting and commissioning, and hand them over.
