Heat interface unit or combi boiler? The advantages of central heating in housing

Heating14 November 2026Ekura Engineering

Apartment heat interface units combine the efficiency of a central boiler room with the independence of each flat. Compared with combi boilers, they offer clear advantages in safety, efficiency and maintenance.

For many years, the most common solution in Turkish housing was a separate combi boiler in every flat. In recent years, central boiler rooms with apartment heat interface units (substations) have become increasingly common in new projects. Turkey’s Regulation on Energy Performance in Buildings also makes central heating mandatory in new buildings with a total floor area of 2,000 m² or more.

Animated explainer · on-screen text in Turkish

What is a heat interface unit?

A heat interface unit is a compact unit installed in each flat. Hot water produced in the central boiler room reaches the flats through risers. A plate heat exchanger in the unit uses this water to serve the flat’s heating circuit and to prepare domestic hot water. The unit also contains a control valve, a heat meter and an electronic controller. There is no gas, combustion or flue in the flat.

Advantages over combi boilers

  • Safety: With no gas piping or combustion in the flats, the risk of gas leaks and carbon monoxide poisoning is removed.
  • Efficiency: Large condensing boilers working in cascade in a central plant run more efficiently than many small combis.
  • Independent use: Each flat switches its heating on and off with its own room thermostat; domestic hot water is prepared instantly.
  • Fair billing: The heat meter measures each flat’s consumption, and bills are shared according to measured use.
  • Maintenance: One boiler room is maintained instead of hundreds of combis; flats need no annual boiler service.
  • Façade and architecture: No flue outlets on the façades and no space needed for a boiler in the flat.

What to watch out for

A system with heat interface units works well only if the central side is designed correctly. The risers must be hydraulically balanced, the boiler room pumps must suit variable flow, and the flow temperature must be enough for both heating and domestic hot water. Placing the units in the landing or at the flat entrance, where they are easy to reach for maintenance, and reading heat meters remotely make operation much easier.

With underfloor heating

Heat interface units work very well with underfloor heating. Because underfloor heating runs at low temperatures, the boilers stay in condensing mode longer and efficiency rises. Inside the flat, each room’s circuit can be adjusted separately from a manifold.

Conclusion

A central boiler room with apartment heat interface units provides safer, more efficient and easier-to-maintain residential heating. At Ekura, we install these systems from the boiler room to the flat. You can follow the rooftop boiler room, risers, heat interface unit and underfloor heating step by step in our 3D Residential Building tour and learn more about our heating systems.

Let's talk about your project.

A site survey, a quote or a technical question — our team will listen to your project and work with you to define the right solution.

Message us on WhatsApp