Heat pump systems: air source or ground source?

Heat Pumps14 November 2026Ekura Engineering

Heat pumps move heat from the air, the ground or water into a building, providing both heating and cooling. Choosing the right source determines the system’s efficiency and the payback of the investment.

Moving away from fossil fuels and rising energy costs are making heat pumps increasingly attractive for homes, hotels, offices and factories. A heat pump can deliver several times more heat than the electricity it consumes, because it does not generate heat; it takes heat from a source and moves it into the building.

Animated explainer · on-screen text in Turkish

How is efficiency measured?

Heat pump efficiency is expressed as COP (coefficient of performance). A heat pump with a COP of 4 produces 4 kW of heat from 1 kW of electricity. Seasonal efficiency (SCOP), which takes changing conditions over the year into account, better reflects real performance. The smaller the difference between source temperature and supply water temperature, the higher the efficiency.

Air source heat pumps

They use the heat in outdoor air. Installation is easy and the initial investment is low.

  • No drilling or excavation is needed, so they suit existing buildings too.
  • When outdoor air gets very cold, efficiency and capacity drop; backup heating may be needed in cold climates.
  • Outdoor unit placement must be planned for noise and air flow.

Ground source heat pumps

They use the ground’s almost constant year-round temperature. Heat is extracted through a closed loop placed in vertical boreholes or horizontal trenches.

  • Because the source stays warm in winter, efficiency is high and stable all year.
  • Drilling makes the initial investment higher; payback depends on how intensively the system is used.
  • Sufficient land and suitable ground conditions are needed for drilling.

Water source heat pumps

Where sources such as lakes, the sea, groundwater or process waste water are available, water source heat pumps can run at very high efficiency. In factories, cooling water or waste heat is a valuable energy source for heat pumps.

Which building, which source?

Heat pumps perform best with low-temperature underfloor heating and fan coil systems. Efficiency drops with older radiator systems that need high water temperatures. In buildings with balanced heating and cooling demand, ground source systems use the ground evenly over the year and run very efficiently. The choice should weigh the building’s loads, available land, electrical infrastructure and budget together.

Conclusion

Combined with the right source and the right installation, a heat pump delivers low operating costs and low carbon emissions. At Ekura, we install air, ground and water source heat pump systems. Learn more about our heat pump systems and mechanical contracting services.

Let's talk about your project.

A site survey, a quote or a technical question — our team will listen to your project and work with you to define the right solution.

Message us on WhatsApp